Skip to main content

5. Cut door hole

5. Cut door hole

You need to drill three holes in the side of the door frame — one large one for the bolt casing to pass through, and two smaller ones for its securing screws. Drill the holes, then fit the rack and its casing through the door so that it passes through the hole in the lock. Secure the casing with screws.

Explained in

    Fitting vehicle deadlocks

    One of the main reasons why so many cars are stolen is that a thief, even if inexperienced, can force a standard car door lock in a matter of seconds, often using nothing more than a piece of coat-hanger wire. Read more